Skip To Content

Tube Bending Services for Structural and Specialty Profiles

Tube Bending Services

Full Vision designed and built its first tube bending machine in the early 1970s. After 50 years of experience, we now offer our customers access to the latest in CNC tube bending technology for round, square, rectangular, and profile shaped tubes made from carbon steel, aluminum, and stainless steel. We do rotary bending as well as push roll bending using a mandrel on tube sizes from 1” to 10” and lengths up to 20’. If you have a tube bending challenge we can offer a solution.

Roll-Over Protection (ROPS)

Equipment List

CSM 120 TSR Rotary Tube Bender

CSM 120 TSR Rotary Tube Bender

SPECIFICATIONS

  • Maximum Round Tube OD = 4”
  • Maximum Square Tube Size = 3”
  • Bend Radius Range = 3” to 19”
  • Maximum Bend Angle = 190°
  • Maximum Length Over Mandrel = 196”
  • Maximum Tube Wall Thickness – Mild Steel = 1/4”
  • Maximum Tube Wall Thickness – Stainless Steel = 1/8”
  • Maximum Tube Wall Thickness – Aluminum = 3/8”
  • Multi-Tool Set Stacking Capability – NO

 

CSM 130 TBRE Rotary Tube Bender

CSM 130 TBRE Rotary Tube Bender

SPECIFICATIONS

  • Maximum Round Tube OD = 5”
  • Maximum Square Tube Size = 3.5”
  • Bend Radius Range = 3” to 15”
  • Maximum Bend Angle = 190°
  • Maximum Length Over Mandrel = 196”
  • Maximum Tube Wall Thickness – Mild Steel = 1/4”
  • Maximum Tube Wall Thickness – Stainless Steel = 1/8”
  • Maximum Tube Wall Thickness – Aluminum = 3/8”
  • Multi-Tool Set Stacking Capability – YES
  • Push-Roll Bending Large Radius Capability – Yes

 

Horn HMT 5.0 Rotary / Roll Tube Bender

Horn HMT 5.0 Rotary / Roll Tube Bender

SPECIFICATIONS

  • Maximum Round Tube OD = 5 1/2”
  • Maximum Square Tube Size = 3 1/2”
  • Maximum Bend Radius = 22”
  • Maximum Bend Angle = 190°
  • Maximum Length Over Mandrel = 240”
  • Maximum Tube Wall Thickness – Mild Steel = 1/4”
  • Maximum Tube Wall Thickness – Stainless Steel = 1/8”
  • Maximum Tube Wall Thickness – Aluminum = 3/8”
  • Multi-Tool Set Stacking Capability – YES
  • Push-Roll Bending Large Radius Capability – Yes

 

Horn HMT 3.0ECNC All Electric Rotary Tube Bender

Horn HMT 3.0ECNC All Electric Rotary Tube Bender

SPECIFICATIONS

  • Maximum Round Tube OD = 3”
  • Maximum Square Tube Size = 2”
  • Rectangular Tube Size = 3” X 1 1/2”
  • Bend Radius Range = 3” to 12”
  • Maximum Bend Angle = 190°
  • Maximum Length Over Mandrel = 120”
  • Maximum Tube Wall Thickness – Mild Steel = 1/4”
  • Maximum Tube Wall Thickness – Stainless Steel = .105”
  • Maximum Tube Wall Thickness – Aluminum = 1/4”
  • Multi-Tool Set Stacking Capability – NO

 

Full Vision Inc. provides tube-forming and metal-fabrication services for OEMs requiring structurally critical components in the agricultural, construction, and fitness equipment sectors. We operate as a vertically integrated manufacturing partner, supporting OEMs from tube processing through final assembly. Learn more about structural tube bending, specialty profiles, and our integrated manufacturing capabilities.

Structural Tube Bending for Specialty Profiles

Roll-Over Protection (ROPS)

Many equipment designs require tight-radius bends or non-round tubing profiles that introduce risks such as wall thinning, wrinkling, or loss of structural integrity. Full Vision specializes in bending square, rectangular, and custom-profile tubing while maintaining both dimensional accuracy and surface quality.To address these challenges, we apply multiple bending methods based on material type, geometry, and performance requirements:

  • Mandrel Bending. Uses an internal mandrel to support the tube during bending, preventing wrinkling, collapse, and excessive wall thinning in tight-radius applications.”
  • Multistack Bending. Enables multiple bend radii on a single part without retooling, reducing setup time and improving production efficiency for complex geometries.
  • Push Rolling. Used for large-radius bends where draw bending is not practical, allowing gradual curvature without inducing excessive stress on the material.
  • Deformation Management. Process controls are applied to maintain consistent cross-sectional shape and surface finish, particularly in cosmetic or load-bearing components.

Complete Solutions Partner

We support complete manufacturing of tube-based assemblies, from initial processing through finishing and final
assembly, reducing the need for multiple vendors. Our facility includes eight tube benders and two high-speed
tube lasers, enabling consistent processing for both high-volume production and specialized projects.Our integrated capabilities include the following value-added services:

  • Tube Laser Cutting. Produces precise end cuts, slots, and features for accurate
    downstream assembly.
  • Welding and Fabrication. Integrates tube and sheet metal components into completed
    subassemblies.
  • Powder Coating. Applies corrosion-resistant finishes in a controlled environment to
    improve durability.
  • Final Assembly. Completes components with hardware installation, labeling, and
    packaging for delivery.

Tube bending is often assumed to be a straightforward process. In practice, factors such as bend radius, spacing between bends, and tooling requirements must be carefully managed. Full Vision works with customer engineering teams to optimize designs within these constraints, improving manufacturability and cost efficiency.

Partner with Full Vision for Complex Tube Bending Projects

Full Vision Inc. brings over 50 years of tube forming experience, supported by advanced processing equipment and integrated manufacturing capabilities. We work with OEMs to produce structurally reliable, repeatable tube components for demanding applications.

Contact our engineering team to discuss your tube-bending requirements or to request a quote for your next project.